|
|
|
Sets of Castings
|
The models shown below are available from stock as sets of castings. All of
our sets of castings come complete with clear and comprehensive drawings and
are guaranteed to contain only the highest quality castings and materials.
The majority of our sets of castings contain all the necessary bar stock and
fixings to build your engine, and you will find these are an ideal way to
begin model engineering.
When choosing your model please check the
"schedule" as this lists exactly what is included, most kits have all the
castings, bar stock, fixings and fittings included however for some of our
largest models we only supply the castings and drawings.
To find out more about a model click on "More Information".
|
|
|
Model: Stuart S50 Unmachined Set of Castings |
Brief Description:
The Stuart S50 is an elegant model of a typical mill engine, as used in the North of England, to power...
|
| Length: 8 1/2 Inches. |
Price: £69.00 (exc VAT) |
|
|
|
Model: Stuart 10V Unmachined Set of Castings |
Brief Description:
The Stuart 10V is the most popular engine in our range. The attractive design, and the fact that it can...
|
| Height: 6 Inches. |
Price: £69.00 (exc VAT) |
|
|
|
Model: Stuart D10 Unmachined Set of Castings |
Brief Description:
The Stuart D10 is well suited to all kinds of stationary and marine work, being able to reach speeds...
|
| Height: 6 Inches. |
Price: £138.00 (exc VAT) |
|
|
|
Model: Stuart 10H Unmachined Set of Castings |
Brief Description:
The Stuart 10H is a development from the popular 10V Engine. It is more than capable of 'doing work'...
|
| Length: 6 Inches. |
Price: £69.00 (exc VAT) |
|
|
|
Model: Stuart Score Unmachined Set of Castings |
Brief Description:
For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer....
|
| Length: 6 Inches. |
Price: £138.00 (exc VAT) |
|
|
|
Model: Stuart Beam Unmachined Set of Castings |
Brief Description:
The Stuart Beam is a relatively simple engine to construct. The use of Watts parallel motion makes this...
|
| Length: 13 Inches. |
Price: £220.00 (exc VAT) |
|
|
|
Model: Stuart Half Beam Unmachined Set of Castings |
Brief Description:
The Stuart Half Beam is a recent addition to our range. Based on the Stuart Beam this engine is relatively...
|
| Length: 11 3/4 Inches. |
Price: £220.00 (exc VAT) |
|
|
|
Model: Stuart Victoria Unmachined Set of Castings |
Brief Description:
The Stuart Victoria follows closely the design of low pressure horizontal engines used throughout the...
|
| Length: 15 1/2 Inches. |
Price: £205.00 (exc VAT) |
|
|
|
Model: Stuart Twin Victoria Unmachined Set of Castings |
Brief Description:
The Twin Victoria is essentially two Stuart Victorias running side by side. This makes for a very impressive...
|
| Length: 15 1/2 Inches. |
Price: £375.00 (exc VAT) |
|
|
|
Model: Stuart James Coombes Unmachined Set of Castings |
Brief Description:
The James Coombes is based on a table engine reputed to have worked for more than a century at a Bristol...
|
| Height: 14 1/2 Inches. |
Price: £220.00 (exc VAT) |
|
|
|
Model: Stuart Real Unmachined Set of Castings |
Brief Description:
The Stuart Real is often called an "upside down" vertical engine, however this is not the case as the...
|
| Height: 15 5/8 Inches. |
Price: £205.00 (exc VAT) |
|
|
|
Model: Stuart No.8 Unmachined Set of Castings |
Brief Description:
The Stuart No.8 shares many common parts with the Stuart 7A, it is a relatively simple engine to build...
|
| Length: 8 1/2 Inches. |
Price: £185.00 (exc VAT) |
|
|
|
Model: Stuart No.4 Unmachined Set of Castings |
Brief Description:
The Stuart No. 4 is a most impressive engine. When fitted with a discwheel this engine is capable of...
|
| Height: 10 Inches. |
Price: £285.00 (exc VAT) |
|
|
|
Model: Stuart No.9 Unmachined Set of Castings |
Brief Description:
The Stuart No.9 is regarded by many as the most attractive engine in the Stuart range. The No.9 is typical...
|
| Length: 11 Inches. |
Price: £285.00 (exc VAT) |
|
|
|
Model: Stuart No.1 Unmachined Set of Castings |
Brief Description:
The first Stuart No.1 was built by Mr. Stuart Turner over one hundred years ago. It is a classic design,...
|
| Height: 13 Inches. |
Price: £375.00 (exc VAT) |
|
|
|
Model: Stuart Major Beam Unmachined Set of Castings |
Brief Description:
The Stuart Major Beam is typical of the smaller industrial engines of the nineteenth century. It is based...
|
| Height: 18 1/4 Inches. |
Price: £760.00 (exc VAT) |
|
|
|
Model: Stuart Oscillator Unmachined Set of Castings |
Brief Description:
The Stuart Oscillator set of castings is an ideal "first time" model engineering project. It is supplied...
|
| Height: 2 1/2 Inches. |
Price: £36.00 (exc VAT) |
|
|
|
Model: Stuart Twin Oscillator Set of Castings |
Brief Description:
The Twin Oscillator is a new model developed from the recently revived S.T. Oscillator. The main advantage...
|
| Height: 2 7/16 inches. |
Price: £69.00 (exc VAT) |
|
|
|
Model: Stuart Compound Launch Unmachined Set of Castings |
Brief Description:
The Compound and Twin Launch are, with the exception of the cylinders, essentially the same engine. ...
|
| Height: 5 1/2 Inches. |
Price: £220.00 (exc VAT) |
|
|
|
Model: Stuart Twin Launch Unmachined Set of Castings |
Brief Description:
The Twin Launch is an ideal engine for the model engineer who has completed a number of projects and...
|
| Height: 5 1/2 Inches. |
Price: £220.00 (exc VAT) |
|
|
|
Model: Stuart Triple Expansion Unmachined Set of Castings |
Brief Description:
The Stuart Triple is a very accurate model of a marine steam engine. It comes complete with working reverse...
|
| Height: 6 Inches. |
Price: £550.00 (exc VAT) |
|
|
|
Model: Stuart Sirius Unmachined Set of Castings |
Brief Description:
The Stuart Sirius was originally designed for racing steam hydroplanes. Particular attention was given...
|
| Height: 6 Inches. |
Price: £220.00 (exc VAT) |
|
|
|
Model: Stuart 5A Unmachined Set of Castings |
Brief Description:
The Stuart 5A is a powerful engine from which you would expect many years of hard work. The engine is...
|
| Height: 15 Inches |
Price: £695.00 (exc VAT) |
|
|
|
Model: Stuart 6A Unmachined Set of Castings |
Brief Description:
The Stuart 6A is the largest engine in our range, being capable of producing approximately 4 bhp at 120...
|
| Height: 20 Inches. |
Price: £1750.00 (exc VAT) |
|
|
|
Model: Stuart Engineering Lathe Unmachined Set of Castings |
Brief Description:
The Stuart Engineering Lathe has been carefully designed by taking the most interesting elements from...
|
| Length: 8 1/2 inches. |
Price: £138.00 (exc VAT) |
|
|
|
Model: Stuart Pillar Drill Unmachined Set of Castings |
Brief Description:
The Pillar Drill has a rising table operated by a rack and pinion mechanism, in the same way as full...
|
| Height: 9 Inches. |
Price: £138.00 (exc VAT) |
|
|
|
Model: Stuart Shaping Machine Unmachined Set of Castings |
Brief Description:
The Stuart Shaping Machine faithfully reproduces the design of single crank shapers that were still in...
|
| Height: 6 1/2 inches. |
Price: £126.00 (exc VAT) |
|
|
|
Model: Steam Hammer Unmachined Set of Castings |
Brief Description:
The Steam Hammer is based on Rigby's patented design and model engineers will enjoy the challenge of...
|
| Height: 10 1/2 Inches. |
Price: £220.00 (exc VAT) |
|
|
|
Model: Oil Field Pump Unmachined Set of Castings |
Brief Description:
The Oil Field Pump is a relatively new addition to the Stuart range. We have designed the model so it...
|
| Height: 12 Inches. |
Price: £220.00 (exc VAT) |
|
|
|
Model: Steam Boiler Feed Pump Unmachined Set of Castings |
Brief Description:
The Steam Boiler Feed Pump is a most interesting model to build requiring good workmanship. The pumping...
|
| Length: 6 Inches. |
Price: £69.00 (exc VAT) |
|
|
|
Model: Manual Feed Pump Unmachined Set of Castings |
Brief Description:
This manually operated feed pump should be used regularly to keep the boiler topped up.
These pumps...
|
| Length: 4 1/2 inches. |
Price: £32.00 (exc VAT) |
|
|
|
 |
