|
|
|
Ready to Run Models
|
The models shown below are available from stock as ready to run models.
Stuart Models ready to run models are carefully built and tested in our
workshop to ensure complete satisfaction.
Each model is supplied fully
painted and polished, and comes complete with a signed certificate of
authentication, containing the individual number of the model together with
the date of purchase. This information is then copied into our ledger, so
that a record is kept for posterity, of the original owner of every Stuart
Model we ever make.
Ready to run models make the perfect gift for anyone with an interest in
steam, engineering or for collectors with an eye for quality.
To find out more about a model click on "More Information".
|
|
|
Model: Iver Steam Locomotive Ready to Run Models |
Brief Description:
The Iver is the first in our range of radio controlled live steam locomotives.
Originating from the...
|
| Length: 11 inches. |
Price: £585.00 (exc VAT) |
|
|
|
Model: Puffin Horizontal Marine Power Plant Ready to Run Models |
Brief Description:
The Puffin engine is a twin in-line oscillating engine. We offer it mounted on a baseplate complete with...
|
| Length: 11 1/4 inches. |
Price: £720.00 (exc VAT) |
|
|
|
Model: Puffin Vertical Marine Power Plant Ready to Run Models |
Brief Description:
Vertical power plants are well suited to launch style boats where their open decks allow for taller boilers....
|
| Length: 9 inches. |
Price: £720.00 (exc VAT) |
|
|
|
Model: Puffin Marine Engine Ready to Run Models |
Brief Description:
For customers who want to build their own boiler or have a very specific application we are able to offer...
|
| Length: 3 1/2 inches. |
Price: £415.00 (exc VAT) |
|
|
|
Model: Stuart S50 Ready to Run Models |
Brief Description:
The Stuart S50 is an elegant model 'Mill Engine' of the type used to power small factories in the north...
|
| Length: 8 1/2 inches |
Price: £475.00 (exc VAT) |
|
|
|
Model: Stuart 10V Ready to Run Models |
Brief Description:
The Stuart 10V has for many years been the most popular engine in our range. It is powerful enough to...
|
| Height: 6 Inches |
Price: £475.00 (exc VAT) |
|
|
|
Model: Stuart D10 Ready to Run Models |
Brief Description:
The Stuart D10 is well suited to all kinds of stationary and marine work, being able to reach speeds...
|
| Height: 6 Inches. |
Price: £890.00 (exc VAT) |
|
|
|
Model: Stuart 10H Ready to Run Models |
Brief Description:
The Stuart 10H is a development from the popular 10V Engine. It is more than capable of 'doing work'...
|
| Length: 6 Inches. |
Price: £475.00 (exc VAT) |
|
|
|
Model: Stuart Score Ready to Run Models |
Brief Description:
For many years we were asked to produce a twin cylinder horizontal engine, the Stuart Score was the answer....
|
| Length: 6 Inches. |
Price: £890.00 (exc VAT) |
|
|
|
Model: Stuart Beam Ready to Run Models |
Brief Description:
The Stuart Beam is a relatively simple engine to construct. The use of Watts parallel motion makes this...
|
| Length: 13 Inches. |
Price: £1380.00 (exc VAT) |
|
|
|
Model: Stuart Half Beam Ready to Run Models |
Brief Description:
The Stuart Half Beam is a recent addition to our range. Based on the Stuart Beam this engine is relatively...
|
| Width: 11 3/4 Inches. |
Price: £1380.00 (exc VAT) |
|
|
|
Model: Stuart Victoria Ready to Run Models |
Brief Description:
The Stuart Victoria follows closely the design of low pressure horizontal engines used throughout the...
|
| Length: 15 1/2 Inches |
Price: £1340.00 (exc VAT) |
|
|
|
Model: Stuart Twin Victoria Ready to Run Models |
Brief Description:
The Twin Victoria is essentially two Stuart Victorias running side by side. This makes for a very impressive...
|
| Length: 15 1/2 Inches. |
Price: £2250.00 (exc VAT) |
|
|
|
Model: Stuart James Coombes Ready to Run Models |
Brief Description:
The James Coombes is based on a table engine reputed to have worked for more than a century at a Bristol...
|
| Height: 14 1/8 Inches. |
Price: £1380.00 (exc VAT) |
|
|
|
Model: Stuart No.9 Ready to Run Models |
Brief Description:
The Stuart No.9 is regarded by many as the most attractive engine in the Stuart range. The No.9 is typical...
|
| Length: 11 Inches. |
Price: £1440.00 (exc VAT) |
|
|
|
 |
